China OEM Zlyj-112-16 Hard Teeth Face CZPT Vertical Anisotropic Single Screw Extruder Gearbox best automatic gearbox

Product Description

 

Product Description

This gearbox is designed for plastic extrusion machine. It  meet JB/T9040-1999 standard.  The gear is made of high-strength alloy steel and hardened by carburizing and quenching. The accuracy of grinding teeth is higher than Level 6 and the hardness is HRC 54-62. In the front of output shaft,we assemble a thrust bearing with  high safety factor to bear the extrusion pressure of screw.

Detailed Photos

 

Loading capacity sheet of CHINAMFG and ZSYJ reduction gearboxes
Type ZLYJ ZSYJ
Spec     * * * * * * * * * * * *
112 133 146 173 200 225 250 280 315 330 375 395 420 450 500 560 630 450 560 530
-8 -8 -10 -12.5 -12.5 -16 -16 -16 -16 -16 -16 -16 -16 -12 -20 -20 -20 -32 -57 -44
                                         
Normal input power(kw) n=1500rpm
Ordinary reliable 15 22 30.8 39 55 75 82.5 116 171 _ 260 300 315 332 450 600 825 240 240 370
High reliable 10 15 18.3 30.8 45 60 67 75 116 207 207 240 250 266 350 550 675 200 220 315
                                         
  Allowable output torque(N.m)
Ordinary reliable 800 1165 1962 2484 4379 6568 7643 11822 17427 _ 26497 3571 32102 38599 5571 76433 105095 48917 87134 103694
High reliable 525 764 1165 1962 3583 5334 6306 7643 11822 21000 21096 24380 25478 33885 44566 70063 85978 40764 79873 88280

Recommended parameters of single-screw extruder machine reduction gearbox(Optional)
Type Spec. Power/Kw Speed-Input Speed-Output Load torque/N.m Axial force/KN Screw diameter Length-Diameter Ratio
ZLYJ 112-8 5.5 800 100 525 35 less than 35 25:1
113-8 6 800 100 764 39 50 25:1
146-10 11 1000 100 1050 54 55 25:1
173-10 18.5 900 90 1962 110 65 25:1
200-12.5 30 1000 80 3581 155 75 25:1
225-12.5 45 1000 80 5371 180 90 25:1
250-16 55 1120 70 7503 192 105 25:1
280-16 75 960 60 7643 258 110 25:1
315-16 85 960 60 13528 287 120 25:1
330-16 110 960 60 17528 360 135 25:1
375-16 132 960 60 21008 390 150 25:1
395-16 185 960 60 29442 400 160 25:1
420-16 160/220 960 60 31831 430 160/170
450-20 213 1000 60 40640 500 180 25:1
500-20 220 1000 50 42571 550 180 25:1
560-17 440 1000 50 84034 700 200 25:1
630-10 540 1000 50 15712 770 250 25:1
ZSYJ 450-32 200 1500 47 4 0571 500 165 25:1
560-57 220 1500 26 80802 700 190 25:1

Company Profile

Zhe jiang yifan gear box group CO., LTD was set up in 1970. It specializes in developing and producing small and medium-sized marine gearboxes, plastic extruder slowdown bins, Z4 DC motors,generators and so on.There are mainly 300 moreproduction equipments,including more than60 big,fine and expensive ones. The area of our company is 110, 000 square meters.There are 350 staff,and 25%of the total number are the middle and senior technical members. Since the venture,we commit toresearching and developing new products,and keeping improving the technology. We pay great attention to the after-salesservice. All of these efforts increase the developing footsteps of our company. We have strong technical strength , sophisticatedprocessing equipments,advanced products detection equipments,and own a complete security system including productsdesigned,mechanical processing,unit assembly,testing before coming out from the factory and after-sales service. Ourproducts have passed the ISO9001 Quality System Certification.

 

Certifications

 

 

Our Advantages

1: High transmission efficiency
2: Smooth operation and low noise
3: Small size and high carrying capacity.
4: Easy to disassemble and easy to install.

FAQ

Q: Are you trading company or manufacturer?
A: We are factory.
 

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
 

Q: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Application: Machinery
Function: Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

worm gearbox

Maintenance Tips for Prolonging the Life of a Worm Gearbox

Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:

  • Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
  • Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
  • Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
  • Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
  • Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
  • Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
  • Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
  • Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
  • Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
  • Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.

By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.

worm gearbox

Energy Efficiency of a Worm Gearbox: What to Expect

The energy efficiency of a worm gearbox is an important factor to consider when evaluating its performance. Here’s what you can expect in terms of energy efficiency:

  • Typical Efficiency Range: Worm gearboxes are known for their compact size and high gear reduction capabilities, but they can exhibit lower energy efficiency compared to other types of gearboxes. The efficiency of a worm gearbox typically falls in the range of 50% to 90%, depending on various factors such as design, manufacturing quality, lubrication, and load conditions.
  • Inherent Losses: Worm gearboxes inherently involve sliding contact between the worm and worm wheel. This sliding contact generates friction, leading to energy losses in the form of heat. The sliding action also contributes to lower efficiency when compared to gearboxes with rolling contact.
  • Helical-Worm Design: Some manufacturers offer helical-worm gearbox designs that combine elements of helical and worm gearing. These designs aim to improve efficiency by incorporating helical gears in the reduction stage, which can lead to higher efficiency compared to traditional worm gearboxes.
  • Lubrication: Proper lubrication plays a significant role in minimizing friction and improving energy efficiency. Using high-quality lubricants and ensuring the gearbox is adequately lubricated can help reduce losses due to friction.
  • Application Considerations: While worm gearboxes might have lower energy efficiency compared to other types of gearboxes, they still offer advantages in terms of compactness, high torque transmission, and simplicity. Therefore, the decision to use a worm gearbox should consider the specific requirements of the application, including the trade-off between energy efficiency and other performance factors.

When selecting a worm gearbox, it’s essential to consider the trade-offs between energy efficiency, torque transmission, gearbox size, and the specific needs of the application. Regular maintenance, proper lubrication, and selecting a well-designed gearbox can contribute to achieving the best possible energy efficiency within the limitations of worm gearbox technology.

worm gearbox

How to Select the Right Worm Gearbox for Your Application

Selecting the right worm gearbox for your application involves careful consideration of various factors:

  • Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
  • Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
  • Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
  • Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
  • Mounting Options: Determine the mounting orientation and configuration that best suits your application.
  • Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
  • Backlash: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
  • Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
  • Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
  • Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.

Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.

China OEM Zlyj-112-16 Hard Teeth Face CZPT Vertical Anisotropic Single Screw Extruder Gearbox   best automatic gearbox	China OEM Zlyj-112-16 Hard Teeth Face CZPT Vertical Anisotropic Single Screw Extruder Gearbox   best automatic gearbox
editor by CX 2023-09-26

Recent Posts

worm drive gearbox

As one of leading worm drive gearbox manufacturers, suppliers and exporters of mechanical products, We offer worm drive gearbox and many other products.

Please contact us for details.

Mail: sales@worm-drive-gearbox.top

Manufacturer supplier exporter of worm drive gearbox