China WSSF series worm helical gear motor reductor conveyor drive worm gearbox components

Product Amount: WS series
Gearing Arrangement: Bevel / Miter
Output Torque: 10~62800 n.m
Rated Energy: .twelve-two hundred kw
Input Speed: 0–1500r/min
Output Pace: .1-270r/min
color: pink, blue, environmentally friendly, as necessary
Substance: Forged iron and steel alloy
mounting: fange, foot, torque arm
Certification: ISO9001:2008
Warranty: 1 12 months
Packaging Specifics: picket situation
Port: Qindao


1,WS sequence reducer are based mostly on the creating block desing, so it is handy for them to match all types of motors or other power enter. The same type of blend can suit motors with diverse electrical power, so that it’s possible for different sorts of machines to mix or hook up.
two,WS collection column worm velocity reducer is a blend of indirect gear and worm equipment levels, whose maximum stand-on your own effectiveness can attain up to 89%.
3,Precise division of transmission ratio with a broad assortment. The combination of equipment can produce a greater transmission ratio at a lower output rotate pace.
4,Various ways of installation. Foot mounted, B5 flange-mounted, or B14 flanged mounted.

Doing work Setting:
one,Working temperature: -40~50°c( the lubrication need to be heated earlier mentioned 0°c if the device works beneath 0°c)
2,The altitude of doing work spot must be reduced than 1000 meters.
three,The enter rotate pace ought to not exceed 1800rpm. The circumferential pace of the gear need to not exceed 20m/s.
four,Appropriate for normal-reverse rotation.
five,With no market limitation.
6,Please check with our specialized supporting division for other circumstances.

Product S37, S47, WPWKO for water drilling worm gear velocity reducer ninety diploma transmission a hundred and ten ratio gearbox stepless pace variator with moto S57, S67,S77, S87, S97
Rated electricity .eighteen~22KW
Output pace .3~145rpm
Output torque ten~4500N.m
Reduction ratio 10~4606
Mounting flang, foot, torqure arm

1, Why the sound of gearbox has been a lot more large??
There are 3 purpose for this problem. One particular is the enamel of gears was obtained destroyed The 2nd is the clearance of bearings could be way too big. The last 1, you need to
check the bearing to see if it is destroyed.
two, Why the working temperature of gearbox become as well substantial??
The lubrication oil filling amount is also high, change the oil level.
Check out if the oil is employed as well prolonged, and exchange it if needed.
Oil is polluted significantly.
3, How to dispose for oil leaking of equipment unit??
There are bad relationship for sealing at protect spot.
The shaft seal is damaged.

Packaging & Transport

Connected ProductsOur main goods:
WR, WF, WK, WS series modular equipment speed reducer with brake motor
H,B collection normal industrial gearbox
P collection planetary gear pace reducer
T collection spiral bevel gearbox
ZDY, ZLY, ZSY, CNC Aluminium Alloy Motorbike Chain Sprocket ZFY parallel shaft sequence
DBY, DCY, DFY vertical shaft series hardened equipment reducer
NGW planetary hardened equipment velocity reducer.

Our Services1,We are all set to give you with technological advices and support.
two,Ahead of solution acceptance, we will solution all of your queries in a timely way, give technical assistance.
3,Our technological companies group will provide technological assistance for merchandise fix and servicing.
four,Our commitment is to develop even more benefit for you, preserve a close contaction partnership with our customers.

Business Information Fifteen years’ hard-doing work has attained our management in power transmission sector. We have a most seasoned employee team in our business. We very own the most advanced processing gear and testing tools. Our solution has been exported to Europe, Southeast Asia, the Center East, Africa, South The usa and several other international locations and areas. They are commonly utilised in metallurgy, mining, petrochemical, tobacco, ceramics, rubber, food, beverages, transportation and other industries. Our merchandise have the exceptional good quality of substantial stability , the innovative efficiency and aggressive charges. The most powerful design team is working for you.

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<brworm reducer


A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.


Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer


The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.


The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China WSSF series worm helical gear motor reductor conveyor drive     worm gearbox componentsChina WSSF series worm helical gear motor reductor conveyor drive     worm gearbox components
editor by czh 2023-02-20

Recent Posts

worm drive gearbox

As one of leading worm drive gearbox manufacturers, suppliers and exporters of mechanical products, We offer worm drive gearbox and many other products.

Please contact us for details.


Manufacturer supplier exporter of worm drive gearbox