DC MOTOR PUMP GROUP one
Common Description
Consisting of the hefty duty DC motor plus the CB1S gear pump, this pump motor group is surely an suitable hydraulic power unit for mobile hydraulic equipments, such as automobile carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP two
General Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump includes a 4.5″ DC motor along with a CBSR gear pump that has a standard energy up/gravity down circuit by using a relief valve, a examine valve and also a solenoid release valve.
Particular Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic components concerned 
just before mounting the energy unit.
3. Viscosity of your hydraulic oil shoud be 15~68 cst, which need to also be clean and free of impurities. N46 hydraulic oil is encouraged.
four. The energy unit need to be mounted horizontally.
five. The relief valve stress is preset about 25% increased than the working stress.
6. Flow control valve for lowing velocity adjustment is available unpon request.
DC MOTOR PUMP GROUP
Tags: