DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
This energy unit includes a energy up electrical power down circuit with load holding on each A & B ports. A stress compensatred movement management is often additional to circuit to manage the decent velocity from the cylinder.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned prior to installation of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities. N46 hydraulic oil is encouraged.
4. The energy unit needs to be mounted horizontally.
5. Check the oil degree during the tank after the original running with the energy unit.
six. Oil altering is needed soon after the original a hundred operation hours, afterwards the moment each 3000 hrs.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This electrical power unit includes a power up gravity down circuit. Get started the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve could be presented if required. Also a strain compen sated movement control might be additional to the circuit to regulate the descent velocity with the cylinder.
Remark: Please talk to our revenue engineer for that different pump displacement, motor electrical power or tank capacity.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned in advance of installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which should really also be clean and no cost of impurities.N46 hydraulic oil is advised.
4. The power unit needs to be mounted horizontally.
five. Check the oil degree while in the tank after the preliminary running from the energy unit.
six. Oil transforming is required immediately after the original a hundred operation hours, afterwards as soon as each 3000 hours.