Material Dealing with Electrical power UNIT one
General Description
This electrical power unit is designed for that fork lift market, consisting of really effective gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down movement are controlled through the lever from the manual release valve, which is equipped with an electrical switch to activate the motor. The lowing velocity is controlled from the strain compensated flow handle valve.
Unique Notes
one. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned prior to installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and cost-free of impurities, N46 hydraulic oil is encouraged .
4. Oil changing is needed soon after the original 100 operation hrs, afterwards when every single 3000 hours.
5. The electrical power unit proven is intended to be mounted horizontally.
Materials Handling Energy UNIT two
General Description
This electrical power unit features energy up gravity down circuit. Activate the commence solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve with the lowering pace controlled through the strain compensated movement management valve. Products of this series could be extensively utilized in the business of logistic units for example fork lift, mini lift table, and so forth.
Distinctive Notes
one. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean each of the hydraulic parts concerned in advance of mounting the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which should really also be clean and free of impurities, N46 hydraulic oil is recommended .
four. 
Oil changing is required right after the initial 100 operation hours,afterwards the moment each 3000 hrs.
5. The electrical power unit ought to be mounted horizontally.