Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is built to operate materials managing products. The reducing movement is achived from the solenoid valve with the reducing pace managed by an adjustable needle valve. The left and suitable functions are outfitted that has a dual pilot operated check valve and cross-over relief valves.
Remark: Please seek advice from our revenue engineer for the unique pump displacement, motor electrical power or tank capacity.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean the many hydraulic elements concerned prior to set up of the power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and absolutely free of impurities.N46 hydraulic oil is suggested.
four. This power unit must be mounted horizontal.
five. Check the oil degree in the tank immediately after the very first get started of the power unit.
6. Oil altering is needed just after the initial 100 operation hours, afterwards after every single 3000 hours.
SNOW PLOW Energy UNIT